Convert a Snapmaker U1 file to the Creality K2 Plus
Built a multicolor .3mf for the Snapmaker U1 and want to run it on your Creality K2 Plus? Drop it into BedReady and get a K2-ready file back — the U1 profile swapped for the K2's and your painted colors remapped onto its slots. Because both printers use OrcaSlicer-family projects, the colors carry over cleanly. Free, in your browser, nothing uploaded.
🔒 100% in your browser — your file is never uploaded.
The problem
A Snapmaker U1 .3mf is a native U1 project bundled with the Snapmaker U1's printer profile and toolchanger machine settings. Open it in Creality Print and — even though it's also Orca-based — the K2 inherits the wrong profile, the bed and build volume are off, and the slot assignments don't line up. Fixing it by hand means re-picking the printer and re-assigning colors.
What BedReady does in one click
- ✓Swaps the Snapmaker U1 profile for the Creality K2 Plus profile
- ✓Remaps your U1-painted colors onto the K2's slots — text, logos & detail kept exactly
- ✓Sets the correct K2 Plus bed size and build height
- ✓Keeps the creator's print settings (layer height, walls, infill, speeds)
- ✓Runs 100% in your browser — nothing uploaded, free, no account
Going the other way? BedReady also converts Creality files to the U1. See the full feature list & comparison.
FAQ
Will my U1 painted colors transfer to the Creality K2?
Yes — cleanly. The Snapmaker U1 and the Creality K2 Plus both use OrcaSlicer-family 3MF projects, so they share the same color-painting format. BedReady reads your U1 painting and remaps each slot onto the K2's slots, keeping text, logos and fine detail exactly.
Why does a Snapmaker U1 .3mf open wrong in Creality Print?
Even though both are Orca-based, a U1 project carries the Snapmaker U1 printer profile and toolchanger machine settings. Creality Print loads it with that foreign profile — the wrong machine, bed and slot setup — until the profile is swapped for the K2's.
Does the K2's CFS map to the U1's slots?
Yes. BedReady lines your U1 colors up onto the K2 Plus's multi-material slots in order, so what you painted on the U1 is what loads on the K2.
Is my file uploaded anywhere?
No. The whole conversion runs inside your browser — the .3mf never leaves your device, there's no upload and no account. It's free.
Do I still slice it in Creality Print?
Yes. BedReady hands back a K2-ready .3mf that you open and slice in Creality Print (or Orca). It keeps the creator's print settings unless you change them there.
Ready to print that U1 model on your K2?
Convert your .3mf — freeSee also: U1 → Bambu, U1 → Prusa.
Independent project — not affiliated with, endorsed by, or sponsored by Snapmaker or Creality. Creality, K2 Plus and Creality Print are trademarks of Creality. All product names are trademarks of their respective owners.