Convert Creality Print files to the Snapmaker U1
Drop a Creality Print .3mf (K-series / CFS multicolor) into BedReady and get a U1-ready file back — your CFS colors mapped onto the U1's 4 slots and the real Snapmaker U1 profile applied. Free, in your browser, nothing uploaded.
🔒 100% in your browser — your file is never uploaded.
The problem
A Creality Print .3mf is sliced for a Creality machine — a K-series printer with the CFS multi-colour unit — and carries a Creality printer profile plus a creality.config vendor marker and its own colour mapping. Snapmaker Orca ignores that marker and treats the file as foreign: it loads the wrong profile, the CFS colours land in the wrong slots — or drop out as plain grey geometry — and the machine settings are tuned for Creality hardware, not the U1. Re-doing it by hand is tedious.
What BedReady does in one click
- ✓Rewrites the Creality generator so Snapmaker Orca loads the file as a native U1 project
- ✓Swaps the Creality K-series profile for the real Snapmaker U1 profile
- ✓Maps the CFS multicolor onto the U1's 4 slots — text, logos & detail kept exactly
- ✓Keeps the creator's print settings (layer height, walls, infill, speeds)
- ✓More than 4 colors? Full Spectrum mixes 2–3 filaments to reproduce the extras
- ✓Runs 100% in your browser — nothing uploaded, free, no account
Works with files from Creality Print, PrusaSlicer, Bambu Studio, MakerWorld and OrcaSlicer. See the full feature list & comparison.
FAQ
Can I open a Creality Print .3mf directly on the U1?
Not cleanly. Creality Print writes the file with a Creality generator string and a creality.config vendor marker; Snapmaker Orca ignores that marker and treats the file as foreign, loading it with the wrong profile and often dropping the colours. BedReady rewrites it so Orca loads it as a native U1 project.
Are my CFS multicolor colors kept?
Yes. The colour painting Creality Print produced for the CFS multi-material unit is read from the .3mf and mapped onto the U1's 4 filament slots, so painted faces — text, logos, detail — print in colour instead of collapsing to grey geometry.
My model has more than 4 CFS colors — will it still print?
The U1 has 4 physical slots, so the first four CFS colours map straight across. Beyond that, Full Spectrum reproduces the extra shades by dithering 2- and 3-filament mixes from the four loaded colours, so a 5- or 6-colour CFS model prints without swapping filament by hand.
Does it fix the profile and machine settings for the U1?
Yes. BedReady swaps the Creality K-series printer profile for the real Snapmaker U1 profile and normalizes the machine settings, so speeds, prime tower and filament-change behaviour match the U1 rather than a Creality machine.
Is my file uploaded anywhere?
No. Conversion runs entirely in your browser — the .3mf never leaves your device, there's no account, and it's free.
Ready to print that Creality model on your U1?
Convert your .3mf — freeSee also: Bambu → U1, PrusaSlicer → U1.
Independent project — not affiliated with, endorsed by, or sponsored by Snapmaker or Creality. Creality Print, CFS and the K-series names are trademarks of Creality. All product names are trademarks of their respective owners.