Skip to content
BedReady

← All filament profiles

Add Goofoo filament profiles to Snapmaker Orca

Snapmaker Orca is Snapmaker's fork of OrcaSlicer, so it runs Goofoo filament profiles — they just need to land in the right folder, set up for the Snapmaker U1. Pick one below and install it in one click, or download and import. Free, in your browser, nothing uploaded.

On macOS you download & import — browsers block writing into ~/Library, where Snapmaker Orca keeps its config. It's quick: download, then in Orca use File → Import → Import Presets (or drag the file in) — it shows up immediately, no restart. For true one-click, the desktop app installs directly.

Your filament folder (macOS): ~/Library/Application Support/Snapmaker_Orca/user/default/filament

The exact folder name can vary by version — if Snapmaker_Orca isn't there, look for SnapmakerOrca or OrcaSlicer in the same place, then open its user/default/filament folder.

Quit Snapmaker Orca before adding — it reads filament profiles at startup. Relaunch it after installing.

20 profiles · built for Snapmaker U1 (0.4 nozzle)

Goofoo 90A TPU

GoofooTPU

Nozzle 220°C · Bed 40°C

Goofoo 95A TPU

GoofooTPU

Nozzle 220°C · Bed 40°C

Goofoo ABS

GoofooABS

Nozzle 260°C · Bed 110°C

Goofoo ASA

GoofooASA

Nozzle 260°C · Bed 100°C

Goofoo PA

GoofooPA

Nozzle 280°C · Bed 100°C

Goofoo PA-CF

GoofooPA

Nozzle 280°C · Bed 100°C

Goofoo PA-GF10

GoofooPA

Nozzle 230°C · Bed 100°C

Goofoo PE

GoofooPE

Nozzle 220°C · Bed 55°C

Goofoo PE-CF

GoofooPE

Nozzle 220°C · Bed 55°C

Goofoo PETG

GoofooPETG

Nozzle 240°C · Bed 80°C

Goofoo PETG HF

GoofooPETG

Nozzle 255°C · Bed 80°C

Goofoo PETG-CF

GoofooPETG

Nozzle 255°C · Bed 80°C

Goofoo PHA

GoofooPHA

Nozzle 220°C · Bed 55°C

Goofoo PLA

GoofooPLA

Nozzle 230°C · Bed 40°C

Goofoo PLA Silk

GoofooPLA

Nozzle 220°C · Bed 55°C

Goofoo PLA-CF

GoofooPLA

Nozzle 240°C · Bed 40°C

Goofoo PP

GoofooPP

Nozzle 235°C · Bed 55°C

Goofoo PP-CF

GoofooPP

Nozzle 235°C · Bed 55°C

Goofoo PP-GF

GoofooPP

Nozzle 235°C · Bed 55°C

Goofoo PVA

GoofooPVA

Nozzle 220°C · Bed 55°C

Easiest — import (no restart):

In Snapmaker Orca: File → Import → Import Presets → pick the downloaded .json (or drag the file onto the window). It shows up in the filament dropdown right away — just make sure the Snapmaker U1 is your selected printer.

Or by folder (needs a restart):

Quit Orca, drop the .json (or unzip the bulk .zip) into your filament folder, then relaunch:

  • Windows: %APPDATA%\Snapmaker_Orca\user\default\filament
  • macOS: ~/Library/Application Support/Snapmaker_Orca/user/default/filament
  • Linux: ~/.config/Snapmaker_Orca/user/default/filament

Browse all filament profiles →

Independent project — not affiliated with or endorsed by Snapmaker, the OrcaSlicer project or Goofoo. All brand and product names are trademarks of their respective owners. Filament profiles are provided as a starting point; verify settings for your printer. Any sponsor is labelled as a sponsor, and sponsorship never affects what is listed, ranked, compared or verified.